Hand Tools Crossword Puzzle

Hand Tools

												1
			2											3			4		5		6

					7
																							8
																										9
																									10
							11
																										12


			13								14
15
									16
																								17
				18						19


											20

21
											22
	23					24
25
											26

									27
																										28
											29

								30													31

		32														33						34		35		36
											37		38		39			40		41


																										42









								43
																			44

Across

Down

A light hammer that is used to drive tacks. One surface is magnetized to hold the tack.

This adjustable wrench loosens and tightens fittings on drain traps, sink strainers, toilet connections, and large, odd-shaped nuts.

You use these pliers to hold and bend wire and to grip and hold objects during assembly operations. They have adjustable jaws.

These nonadjustable wrenches have two types of wrenches one of the ends of the wrench is open and the other is closed or box-end.

This bar has two claws, one at either end,and is ground to a chisel- like bevel slant on both ends. You can use it like a claw hammer to pull nails. You can also drive it into wood to split and rip apart the pieces.

This square is an adjustable gauge for setting, testing, and transferring angles, such as when making a miter or bevel cut. The metal blade pivots and can be locked at any angle.

This is the most common type of standard screwdriver; A tool used to put in slotted screws.

This is an adjustable square consisting of a steel rule that slides through an adjustable head.

This level is basically a telescope with a spirit level mounted on top. It can be rotated 360�, but cannot be tilted up and down.It is used to check grades and elevations and to set up level points over long distances.

These pliers have serrated teeth that grip flat, square, round, or hexagonal objects.You can set the jaws in up to five positions by slipping the curved ridge into the desired groove.

This screwdriver has an hour-glass-shaped tip that is especially useful when you need extra holding power an in cars and appliances.

A combination hammer with rubber and plastic heads designed to protect the surface being struck.

These levels feature a simulated bubble display plus a digital readout of degrees of slope, inches per foot for rise and run of stairs and roofs,

These Levels don't depend on the human eye. It emits a high-intensity light beam, which is detected by an target at distances up to 1,000'. It is operated in the sweep mode, the head rotates through 360� allowing the laser beam to sweep multiple sens

These levels are used to determine if a surface is level or plumb. It has three vials filled with alcohol

This square is used for laying out square and angled lines on large surfaces such as plywood, paneling, wallboard, etc.

This type of carpenter's square made of cast aluminum that combines a protractor,try square, and framing square.

This screwdriver has a square drive that provides high torque power. Usually color coded according to size, it can reach screws that are sunk below the surface.

This level is a simple, accurate tool consisting of a length of clear plastic tubing. It works on the principle that water seeks its own level. An example is checking the level from one room to the next when a wall is in the way.

This is a square whose legs are fixed at a right angle

Carpenter's tool used to drive and pull nails.This hammer has a steel head and a handle made of wood, steel, and fiberglass.

This level is utilized to ensure that a surface or angle is level or plumbed properly. It is a modern type of the spirit or bubble level, this level is also magnetic making it handy for hanging a picture to checking the alignment of joints during the

These wrenches are L-shaped hexagonal six-sided steel bars. Both ends fit the socket of a screw or bolt. The shorter length of the L-shape is called the head and the longer length is the handle.

This square has a blade fixed at 45 ͦ for laying out and marking lines such as for a miter cut. The opposite angle is fixed at 135

A hammer with a leather head, which is designed to protect the surface being struck.

A nonadjustable wrench with an opening at each end that determines the size of the wrench.

These pliers use to cut heavy or large-gauge wire and to hold work. The wedged jaws reduce the chance that wires will slip, and the hook bend in one handle gives you a better grip.

A common hammer with a rubber head designed to protect the surface being struck.

This hammer is a heavy-duty tool used to drive post or other large stakes. You can also use it to break up cast iron or concrete.They are 1. Double face long handled 2. Double face short handled and 3. Crosspeen.

This bar is a straight steel rod with a curved claw at one end. It is used to pull nails that have been driven flush with the surface of the wood or slightly below

This nonadjustable wrench forms a continuous circle around the head of a fastener. The ends have six or twelve points. The ends come in different sizes, ranging from 3/8 inch to 1 5/16 inches.

A tool used to put in cross-head screws.

This adjustable wrench is used to tighten and loosen all types and sizes of threaded pipe.

A prying tool bar with a nail slot at the end to pull nails out in tightly enclosed areas. it can also be used as a small pry bar. It is usually 2 inches wide and 15 inches long.

This level telescope can be moved up and down 45�, making more operations possible than with the builder's level.Movement of the telescope in the up and down position also allows the level to be used to plumb columns,building corners,or any other ver

This level can be used to level a long span. It consists of a glass tube mounted in a sleeve that has a hook on either end. The hooks are attached at the center of a stretched line, which is moved up or down until the bubble is centered.

This screwdriver conforms to screws that can also be operated with hex keys; it is suitable for socket-head screws that are recessed.

These pliers are used to get into tight places where other pliers won't reach or to grip parts that are too small to hold with your fingers. They are useful for bending angles in wire or narrow metal strips.

A smooth-jawed adjustable wrench used for turning nuts, bolts, small pipe fittings, and chrome plated pipe fittings.

This L-shaped square used to mark or measure materials and check for uniformity and 'square'.

This hammer has a flat face for striking and a rounded face that is used to align brackets and drive out bolts.

This screwdriver has a star-shaped tip that is useful for replacing such parts as tailgate lenses;it is widely used in household appliances as well as lawn and garden equipment.

These pliers clamp firmly onto objects the way a vise does. A knob in the handle controls the width and tension of the jaws. You close the handles to lock the pliers. You release the pliers by pressing the lever to open the jaws.

A set of tools used to shape wood projects.

Answer